What should I pay attention to when using the hedge trimmer?

The hedge trimmer is a two-stroke power. In use, attention should be paid to the power, transmission and cutters to ensure the normal use of the machine:

1. Engine:

A. For qualified gasoline and engine oil, ensure their mixing ratio (25:1);

B. Regularly (25 hours) check and replace the air filter to check the spark plug;

C. After working on a tank of oil, you should rest for 10 minutes, and clean the loose gasket of the machine after each work to ensure heat dissipation;

D. When storing, you must clean the body, drain the mixed fuel, and burn the fuel in the vaporizer; remove the spark plug, add 1-2ml of two-stroke engine oil to the cylinder, pull the starter 2-3 times, and install the spark plug.

2. Transmission: regular (25 hours) replenishment of grease

3. Cutter: Check the gap between the upper and lower blades regularly (25 hours), and adjust them in time (the interval is the half-round thread interval of the bolt) to keep the blade sharp. Fill the blade with engine oil every hour of work, trimming diameter <=10mm.